Bill's Laser engraving and cutting
I have a laser engraving and cutting system from Kern electronics and Lasers inc.
The cutting area is 4 foot by 8 feet.
I can cut...
I can also have the table scan back and forth and make 3D images in
wood and plastic.
- up to 1/2 inch Plexiglas
- up to 1/2 inch wood and plywood.
- up to 1/8 inch steel
- Abs/CPVC plastics up to 1/2 inch
- Fr4 circuit boards
- Gaskets. I can also use my flat been scanner to copy gaskets.
I can also engrave images on to...
- metals: aluminum, steel, brass
The actual cutting system uses HPGL for cutting and Tiff for 3D
Engraving. I can translate DXF and some other formats.
$30 / per hour of setup time.
(Special!) $5 /per hour of run
Samples. Click to enlarge